undefined

Risico op snijwonden

Op het eerste gezicht lijkt het misschien dat alleen uw bovenste ledematen het risico lopen te worden gesneden, maar u kunt ook uw onderste ledematen en andere delen van uw lichaam, inclusief uw gezicht, verwonden.

Snijden vormt een gevaar voor werknemers in professionele operaties en voor iedereen die met scherpe voorwerpen werkt (inclusief papier). Laten we het risico op snijwonden benaderen vanuit het oogpunt van zowel een vakman en situaties in het dagelijkse leven.

Cuts in workplaces

Cuts and lacerations are common workplace accidents. Cuts or lacerations account for up to 30% of all workplace injuries and approximately 70% of them involve hands and fingers.

Those can be minor abrasions that can be treated on the spot, but also serious or life-threatening injuries - deep lacerations or even amputations.

How do the accidents happen?

A cut or laceration can occur at work in a number of ways. For example, if a worker uses an unsuitable work tool or a tool in poor condition. Poor lighting, clutter and dirt can also play a role, as can insufficient training, working too quickly, not using the correct protective equipment and not following safety procedures.

Werkgevers moeten werknemers beschermen

Werkgevers moeten procedures opstellen om de blootstelling van werknemers aan het risico van snijwonden te identificeren en te beheersen.

De meest effectieve voorzorgsmaatregel is om het risico op snijwonden zelf te voorkomen. Als u de mogelijkheid hebt om robotwerk te vervangen door gevaarlijke activiteiten, maak daar dan gebruik van. De risico's kunnen net zo goed worden uitbesteed en dus volledig uit een operatie kunnen verwijden. Als deze opties om het risico op snijwonden uit te sluiten te duur zijn, is het noodzakelijk om de juiste bescherming door middel van PBM te gebruiken om een ​​persoon te beschermen tegen snijwonden.

How to protect yourself if the risk cannot be eliminated?

undefined

How to protect yourself if the risk cannot be eliminated?

When cutting, make sure the tool is always safe, in good condition and never hold the object you are cutting in your hand.

  • While working, keep your hand out of cut trajectory
  • Make sure the blades are sharp - dull blades require more force to be used, increasing the chance of an accident.
  • Wear necessary PPE, including goggles, gloves, and cut-resistant sleeves.
  • Never use the cutting disc as a screwdriver, pry bar or cleaver.
  • Do not leave exposed blades unattended, keep tools in closed position when you do not use them.
  • Do not cut anything with the blade against the body.
  • Use a separate drawer for cutting and other sharp tools.
  • Follow standardized work regulations.

Injuring yourself with a sharp object at home is quite easy, too

Minor injuries from a sharp object are among the most common accident. They are not always deep cuts; they can be minor abrasions and superficial bruises and cuts. As these are not life-threatening injury, home treatment will suffice.

Such injuries are caused by:

  • Break-off knives
  • Kitchen knives
  • Sharp shards
  • Jagged can lids
  • Paper and cardboard
  • Shelves and other items made of thin sheet metal
  • Glass wool

Hoe het risico op snijwonden in het dagelijks leven te verminderen?

Volg altijd de instructies van het gereedschap - in elke gebruikershandleiding staat hoe het gereedschap moet worden bediend en gebruikt (het is bijvoorbeeld in het geval van een kettingzaag verboden om het apparaat boven hartniveau te gebruiken).

  • Let op - volg de regels.
  • Neem beschermingszones in acht bij het gebruik van het apparaat.
  • Gebruik van persoonlijke beschermingsmiddelen

Geen enkele thuiskok is een professional en ze lopen het risico per ongeluk hun vingers of handpalmen af ​​te snijden. Zelfs op zulke momenten kunt u uzelf beschermen door snijbestendige handschoenen te gebruiken die u op geen enkele manier beperken tijdens het werken.

How does cut-resistant work equipment protect you?

undefined

How does cut-resistant work equipment protect you?

Clothes, gloves and shoes feature a similar principle. The layer of the upper material – fabric, leather or membrane – is tightly connected to the second layer consisting of several kilometers of textile, which has a single task. It begins to loosen from gloves, shoes or clothing and chokes or clogs the chainsaw, angle grinder, etc. Kilometers of fabric wind up on the cutting equipment and it stops at once.

Niets om te vergelijken