PICTOGRAMS

Overview of standards and product features.

Norms

  • EN 1073-1
    Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination
  • EN 1073-2
    Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
  • EN 1082-1
    Gloves and arm guards protecting against cuts and stabs by hand knives - Chain mail gloves and arm guards
  • EN 1082-2
    Gloves and arm guards protecting against cuts and stabs by hand knives - Gloves and arm guards made of material other than chain mail
  • EN 1146
    Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape
  • EN 1149-1
    Protective clothing - Electrostatic properties - Test method for measurement of surface resistivity
  • EN 1149-2
    Electrostatic properties. Test methods for measurement of vertical resistance.
  • EN 1149-5
    Protective clothing - Electrostatic properties Material performance and design requirements
  • EN 1150
    Visibility clothing for non-professional use
  • EN 12477
    Protective gloves for welders
  • EN 12941
    Powered filtering devices incorporating a helmet or a hood
  • EN 12942
    Power assisted filtering devices incorporating full face masks, half masks or quarter masks
  • EN 13034
    Chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
  • EN 13356
    Visibility accessories for non-professional use
  • EN 136
    Full face masks
  • EN 13832-1
    Footwear protecting against chemicals - Terminology and test methods
  • EN 13832-2
    Footwear resistant to chemicals under laboratory conditions
  • EN 13832-3
    Footwear highly resistant to chemicals under laboratory conditions
  • EN 140
    Half masks and quarter masks
  • EN 14052
    High performance industrial helmets
  • EN 14058
    Garments for protection against cool environments
  • EN 14126
    Performance requirements and tests methods for protective clothing against infective agents
  • EN 143
    Particle filters
  • EN 14328
    Gloves and armguards protecting against cuts by powered knives
  • EN 14387
    Gas filter(s) and combined filter(s)
  • EN 14404
    Knee protectors for work in the kneeling position
  • EN 14605
    Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight Type 3, Type 4, Type PB [3] and Type PB [4]
  • EN 14605+A1
  • EN 149
    Filtering half masks to protect against particles
  • EN 16523-1
  • EN 166
    Personal eye-protection - Specifications
  • EN 169
    Personal eye-protection - Filters for welding and related techniques
  • EN 170
    Personal eye-protection - Ultraviolet filters
  • EN 171
    Personal eye-protection - Infrared filters
  • EN 172
    Personal eye protection - Sunglare filters for industrial use
  • EN 1731
    Personal eye protection - Mesh eye and face protectors
  • EN 175
    Equipment for eye and face protection during welding and allied processes
  • EN 1827
    Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only
  • EN 1836
    Sunglasses and sunglare filters for general use and filters for direct observation of the sun
  • EN 340
    Protective clothing - General requirements
  • EN 342
    Ensembles and garments for protection against cold
  • EN 343
    Protective clothing - Protection against rain
  • EN 352-1
    Hearing protectors Ear-Muffs
  • EN 352-2
    Hearing protectors Ear-plugs
  • EN 352-3
    Hearing protectors Ear-muffs attached to an industrial safety helmet
  • EN 352-4
    Hearing protectors Level-dependent ear-muffs
  • EN 352-5
    Hearing protectors Active noise reduction ear-muffs
  • EN 352-6
    Hearing protectors Ear-muffs with electrical audio input
  • EN 352-7
    Hearing protectors Level-dependent ear-plugs
  • EN 352-8
    Hearing protectors Entertainment audio ear-muffs
  • EN 353-2
    PPE against falls from a height - Guided type fall arresters including a flexible anchor line
  • EN 354
    Personal fall protection equipment - Lanyards
  • EN 355
    PPE against falls from a height - Energy absorbers
  • EN 358
    PPE for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards
  • EN 360
    PPE against falls from a height - Retractable type fall arresters
  • EN 361
    PPE against falls from a height - Full body harnesses
  • EN 362
    PPE against falls from a height - Connectors
  • EN 363
    Personal fall protection systems
  • EN 365
    PPE against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair,marking and packaging
  • EN 374-1
    Protective gloves against chemicals and micro-organisms - Terminology and performance requirements
  • EN 374-2
    Protective gloves against chemicals and micro-organisms - resistance to penetration
  • EN 374-3
    Protective gloves against chemicals and micro-organisms - resistance to permeation by chemicals
  • EN 379
    Personal eye-protection - Automatic welding filters
  • EN 381-11
    Requirements for upper chainsaw body protectors
  • EN 381-5
    Requirements for chainsaw leg protectors
  • EN 381-7
    Requirements for chainsaw protective gloves
  • EN 381-9
    Requirements for chain saw protective gaiters
  • EN 388
    Protective gloves against mechanical risks
  • EN 397
    Industrial safety helmets
  • EN 405+A1
  • EN 407
    Protective gloves against thermal risks (heat and/or fire)
  • EN 420+A1
  • EN 421
    Protective gloves against ionizing radiation and radioactive contamination
  • EN 469:2005+A1:2006
    Protective clothing for firefighters - Performance requirements for protective clothing for firefighting
  • EN 471
    High-visibility warning clothing for professional use
  • EN 50321
    Electrically insulating footwear for working on low voltage installation
  • EN 50365
    Electrically insulating helmets for use on low voltage installations
  • EN 511
    Protective gloves against cold
  • EN 531
    Protective clothing for industrial workers exposed to heat (excluding firefighter's and welder's clothing)
  • EN 533
    Protective clothing - Protection against heat and flame - Limited flame spread materials and material assemblies
  • EN 60903
    Live working - Gloves of insulating material
  • EN 61340-5-1
    Protection of electronic devices from electrostatic phenomena. General requirements.
  • EN 61482-1-2
    Live working - Protective clothing against the thermal hazards of an electric arc - Determination of arc protection class of material and clothing (box test)
  • EN 659
    Protective gloves for firefighters
  • EN 702
    Protective clothing - Protection against heat and flame
  • EN 795
    Protection against falls from a height - Anchor devices
  • EN 812
    Industrial bump caps
  • EN 813
    Personal fall protection equipment - Sit harnesses
  • EN 943-1
    Performance requirements for ventilated and non-ventilated gas-tight (Type 1) and non-gas-tight (Type 2) chemical protective suits
  • EN 943-2
    Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET)
  • EN ISO 10819
    Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996)
  • EN ISO 11611
    Protective clothing for use in welding and allied processes
  • EN ISO 11612
    Clothing to protect against heat and flame
  • EN ISO 13688
    Protective clothing. General requirements.
  • EN ISO 13982-1
    Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
  • EN ISO 13982-2
    Test method of determination of inward leakage of aerosols of fine particles into suits
  • EN ISO 13998
    Aprons, trousers and vests protecting against cuts and stabs by hand knives
  • EN ISO 14116
    Protection against heat and flame - Limited flame spread materials, material assemblies and clothing
  • EN ISO 17249
    Safety footwear with resistance to chain saw cutting
  • EN ISO 20345
    Safety footwear
  • EN ISO 20346
    Protective footwear
  • EN ISO 20347
    Occupational footwear
  • EN ISO 20349
    Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding
  • EN ISO 20471
    High visibility clothing - Test methods and requirements
  • EN 374
    Protective gloves against chemicals and micro-organisms - resistance to permeation by chemicals
  • RIS 3279 TOM
    High Visibility Clothing
  • EN 12492
    Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods.

Properties

  • 2in1 jacket
  • 2in1 trousers
  • 3in1
  • 4in1 jacket
  • 4in1 trousers
  • coolway
  • waterproof zippers
  • waterproof
  • breathable
  • windproof
  • oilproof
  • teflon
  • reversible design
  • reflective accessories
  • custom tailoring of non-standa
  • absorption of energy in heel
  • antislip sole
  • water resistant upper
  • safety toe cap
  • heat resistant sole
  • protection against cold
  • antiperforation steel midsole
  • breathing upper
  • oil and fuel resistant sole
  • ESD protection
  • composite toe cap
  • leather
  • layered leather
  • textile
  • longer cuts available
  • anti-scratch coating
  • anti-fog coating
  • suitable for simultaneous use
  • adjustable temple length
  • adjustable temple angle
  • non metalic antiperforation mi
  • antistatic shoes
  • short term contact with foods
Product portfolio is shown for guidance only, may not coincide with the actual offer.